Metal fence toppers add a cut-steel skyline on top of a wood privacy fence without rebuilding the whole run. This page covers matching width and height to your bay, typical Canadian post spacing, and how our Manitoba-made toppers are finished for outdoor use.
Measure the bay, then pick exact W×H
Order toppers by exact width × height. Small / Medium / Large labels alone leave too much guesswork. Common sizes in our shop include 4×12, 6×12, and 8×18 (inches, width × height). Measure the clear opening between posts, or the fence-top span you want covered, then leave a little room for mounting hardware and wood movement.
- Measure post-to-post clear span for each bay you plan to top
- Confirm the wood top rail is sound and level enough to carry the steel
- Decide the height you want: privacy screen, silhouette only, or a taller decorative crest
- Order matching widths when several bays sit in a row
Browse fence toppers. For more screening below the top rail, see metal fence privacy panels and screens.
Typical post spacing in Canadian yards
Residential wood fences in Canada commonly set posts about 6 to 8 feet apart on centre. Trade guides such as FenceScape’s post-spacing overview put most wood privacy and picket fences in that 6–8 ft band, with closer spacing (around 6 ft) favoured for taller privacy fences and windy sites. The Home Depot’s fence build guide also uses posts every 6 to 8 feet for many DIY layouts and reminds builders to check local height and setback rules.
Our product pages reflect the same range: posts are usually 6 to 8 ft on centre, and many privacy runs land near 6 ft bays. Measure your own posts before you order. A 6×12 topper is a width × height size. It does not mean every bay is exactly 6 feet.
Install basics on a wood privacy fence
Fence toppers sit on the top of an existing wood privacy fence. Check the product page for mounting details for your design. Basic steps:
- Dry-fit the panel on the bay before drilling
- Use outdoor-rated fasteners suited to wood and the topper’s weight
- Keep fasteners clear of post centres if the design spans rail only
- Seal outdoor wood penetrations when the manufacturer recommends it
- Confirm gate swing and neighbour sightlines if the topper adds height
Local fence height limits still apply after you add a topper. Check your municipality if you are near a maximum height already.
Steel and finish for prairie weather
Our fence toppers are 12-gauge mild steel, powder-coated for outdoor use. We rate our powder-coated steel for about 20 years in direct UV before it needs redoing. That is a Bear Country Metalworks manufacturer rating, not an independent AAMA steel-system warranty. Open scrollwork sheds wind better than large solid sheets. Wide solid shapes need solid attachment along the rail.
Proof within about 3 days for custom requests. After approval and payment, delivery is typically about 3–4 weeks to the door, with free shipping in Canada.
FAQ: fence topper size and install
What sizes do you offer?
Common sizes include 4×12, 6×12, and 8×18 (width × height). Ask our team if your bay needs a custom width.
Do toppers replace a code guard or privacy fence?
No. They sit on an existing wood privacy fence as decorative extensions, and sometimes add screening. Your fence structure and local height rules still govern the run.
How far apart are posts usually?
Many residential wood fences use 6 to 8 ft post spacing. Measure your bays. Do not assume every section is identical.
Will powder-coated mild steel last outdoors?
We rate our powder-coated steel for about 20 years in direct UV as a Bear Country Metalworks product rating. Touch up chips so bare steel does not stay exposed.
How long until a topper arrives?
Proof within about 3 days when customization is involved. After approval and payment, about 3–4 weeks to the door.
Shop related: fence toppers, privacy panels and screens, outdoor metal signs, and metal garden art.


